The safety of road cutting discs is the focus of our attention, and there is no clear operating rule for this point, but we can learn from some similar operations to improve the production process and improve the monitoring methods. The following is a brief understanding of the cutting discs. How to affect work:
The circular teeth of the base body are not clean, resulting in weak welding. The sintering process parameters are not well controlled, the sintering temperature is low, "under-sintering" makes the welding weak, and the carcass itself has low strength and is fragile. In traditional high-frequency welding, the bonding strength of the welding seam (especially at high temperature) is not high enough, and accidents such as the blade tip flying and hurting people are prone to occur during the sawing process, and the safety and reliability of the saw blade is not good.
